Robot Vacuum Cleaner
Intelligent SLAM vision system. For accurate navigation.
LED light ring. Sees where it's going, even in low light.
Full-width brush bar. Wherever it goes, it cleans.
Connects to the Dyson Link app. Control from anywhere.
Advanced memory
Powerful quad core processors allow the robot to store maps and constantly aggregate them over time. Its 4Gb of memory¹ is 16 times that of its predecessor⁴, with eight times more short-term memory¹ and 100 times more long-term memory¹ to enable continuous learning and improvement.
Filters allergens and expels clean air
Whole machine filtration captures particles as small as 0.3 microns, expelling cleaner air.
This is a carousel with slides. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
Clean the way you want
Divide your home into cleaning zones and define how and where your robot cleans.
Clean the way you want
Divide your home into cleaning zones and define how and where your robot cleans.
Power when you need it
Choose where to use each power mode from room to room, allowing your robot to adapt as it cleans your home.
Power when you need it
Choose where to use each power mode from room to room, allowing your robot to adapt as it cleans your home.
Set and schedule your cleans
Create schedules for each zone, setting a time, day, frequency and power mode to suit each zone.
Set and schedule your cleans
Create schedules for each zone, setting a time, day, frequency and power mode to suit each zone.
Set restrictions around your home
Control how your robot cleans, like defining areas to avoid, the order of rooms it cleans or vacuuming without the brush bar on.
Set restrictions around your home
Control how your robot cleans, like defining areas to avoid, the order of rooms it cleans or vacuuming without the brush bar on.
Select areas to avoid
Set the areas of your home you want the robot to avoid when cleaning.
Select areas to avoid
Set the areas of your home you want the robot to avoid when cleaning.
Brush bar control
Choose areas where you want the brush bar turned off, such as noise-sensitive areas or long-haired rugs.
Brush bar control
Choose areas where you want the brush bar turned off, such as noise-sensitive areas or long-haired rugs.
Set no-climb zones
Tell your robot not to climb over certain obstacles, to avoid delicate items or areas.
Set no-climb zones
Tell your robot not to climb over certain obstacles, to avoid delicate items or areas.
See more app features
-
Connects quickly
Bluetooth® wireless technology allows you to set up the connection between your robot and your smartphone quickly and easily.
-
Always improving
Wi-Fi capability enables the Dyson 360 Heurist™ robot to work when you're not there. And it can receive over-the-air updates, so it's always using the latest software.
Dyson 360 Heurist™
Frequently asked questions
Which WiFi routers does it support?
Dyson 360 Heurist™ is compatible with most 2.4GHz and 5GHz wifi routers.
How far away can it detect obstacles?
The long range sensors can see up to 2m, the short range obstacle sensors can see up to 60cm and the wall follow sensors can see up to 15cm.
How do the LED lights work?
LED lights help your robot clean in low light. Your robot senses low light areas using the camera and uses its ring of LED lights to selectively illuminate those areas, helping it to navigate.
What can cause connection errors and how can I troubleshoot these at home?
Your robot accesses the Dyson cloud through your home Wi-Fi network. If your robot’s Wi-Fi light is not illuminated, this connection may be broken. Check your home network is working correctly. Then connect to the Dyson Link App on your phone. The app will indicate the source of the problem and provide information on how to resolve the issue.
What does 'returning to start' mean?
This means your robot is returning to the starting point of its current clean. This could be at its dock or a position in the room.
Why has my robot not finished its clean?
If your robot encounters an issue during a clean, an Amber ring will be displayed around the icon section. An additional light will display, indicating what the cause of the issue might be. If this happens, you can troubleshoot from the app and follow the steps on-screen to solve the problem.
What should I do if my robot cannot get back to the dock?
This can occur if the robot is picked up and placed in a different location, if lighting has changed significantly or if the robot cannot see enough features to orient itself by. Your robot will initially try to identify its location by cleaning areas close to its last known position. If this fails, it will go into a ‘random bounce’ cleaning pattern to find an area it recognises. You can solve this by returning your robot to its dock.
Why has my robot not cleaned the whole room but says that the clean is completed and has successfully returned to the dock?
The robot will always try to clean all areas it can access. Occasionally, it may avoid an area if the path to get there is considered too risky by the robot, such as a high chance of getting stuck or becoming lost.
Choose your model
Dyson 360 Heurist™
Powerful Dyson suction in a robot.
Intelligent SLAM Navigation with LED lights
3 power modes. Cleaning that suits you.
What's included
See all Click to learn more-
Docking station
-
Power supply
-
Choose the right vacuum for you
Buy direct from the people who made it
- 1 Based on Dyson internal research data, compared to the Dyson 360 Eye™
- 2 Tested to ASTM F1977-04, tested in maximum suction mode.
WARNING: Avoid counterfeit products, websites and phishing emails. Protect yourself from fraudsters by only shopping direct from Dyson.com and authorised third party retailers. Learn more about scams and counterfeit machines.
.png?scl=1&fmt=png-alpha){kind=icon}
