Skip navigation
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Let's get your machine working

DC15 Animal™
See all steps

Please select the appropriate option

Clean the bin and cyclone

Press the button at the top of the cyclone handle and remove the bin from the machine.

Troubleshooting image

Press the red button on the top of the cyclone to open the bin base.

Troubleshooting image

Press the button near the rectangular inlet to remove the clear bin from the cyclone.

Troubleshooting image

The clear bin can be wiped with a damp cloth.

WARNING: Do not use any detergent or polish on any part of the machine.

Check the bin and cyclone for blockages and remove as necessary.

Ensure that the bleed valve at the top of the cyclone is free of debris and moves freely when pressed.

Clear any hair or fibres from the cyclone shroud.

WARNING: Do not use any water on the cyclone.

Troubleshooting image

Once the parts are completely dry, reassemble and test the machine.

Is there anything else we can help with?

Please select the appropriate option

Where have you noticed the drop in performance?

Check the Brush bar

Press the foot pedal to release the Cleaner head and pull the handle towards you.

Troubleshooting image

Ensure the stabilising wheels are fully retracted or the Brush bar will not operate.

Troubleshooting image

Lay the machine on its side, keeping it in the vacuuming position.

Turn the machine on and check to see if the Brush bar is spinning.

Troubleshooting image

NB: Please keep hair and loose clothing away from the Brush bar.

Check the Cleaner head

Turn off and unplug the machine.

Check the Cleaner head for any blockages and remove as necessary.

Troubleshooting image

Is there any debris in the Cleaner head?

Clear the Cleaner head

Turn off and unplug the machine.

Remove the end caps:

Undo coloured soleplate fasteners with a coin

Rotate end caps to remove.

Troubleshooting image

Remove the Brush bars:

Pull out Brush bar sections

Cut out debris avoiding bristles.

Troubleshooting image

Refit the Brush bars and tighten the fasteners.

Has this resolved the problem?

We need a little more information to help us solve your issue.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Check the valve pipe and Cleaner head hose

Squeeze the release catches to remove the valve pipe and check inside.

Troubleshooting image

Pull the top end of the tube away from the machine and check inside.

Troubleshooting image

Reassemble and test machine.

Has this resolved the problem?

Check the bin and cyclone

Press the button at the top of the cyclone handle and remove the bin from the machine.

Troubleshooting image

Press the red button on the top of the cyclone to open the bin base.

Troubleshooting image

Press the button near the rectangular inlet to separate the clear bin from the cyclone.

The clear bin can be wiped with a damp cloth.

Do not use any detergent or polish on any part of the machine.

Troubleshooting image

Check the bin and cyclone for blockages and remove as necessary.

Ensure that the bleed valve at the top of the cyclone is free of debris and moves freely when pressed.

Clear any hair or fibres from the cyclone shroud.

WARNING: Do not use any water on the cyclone.

Troubleshooting image

Once the parts are completely dry, reassemble and test the machine.

Has clearing the bin and cyclone resolved the problem?

Wash the filter

Please follow the steps in the video to wash the filter.

For a step by step guide, please select step by step.

Has washing the filter resolved the problem?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Washing the filter

Turn the power off and unplug the machine.

Lift the filter release catch and remove the filter from the machine.

Troubleshooting image

Wash the filter in cold water only.

WARNING: Please do not use detergent, do not wash in a dishwasher or washing machine.

Troubleshooting image

Leave the filter to dry in a warm place until completely dry.

WARNING: Do not dry the filter in a tumble dryer, microwave, oven or near and open flame.

Troubleshooting image

Make sure the filter is completely dry before replacing in the machine.

Replace the filter into the filter casing and then put back into the cyclone top.

This filter should be washed at least once every 3 months. The permanent filter located under the clear bin should last the lifetime of the machine and does not need to be washed.

Please do not remove this filter.

Has washing the filter resolved the problem?

Clear the Cleaner head

Turn off and unplug the machine.

Remove the end caps

Undo coloured soleplate fasteners with a coin.

Rotate endcaps to remove.

Troubleshooting image

Remove the Brush bars

Pull out Brush bar sections.

Cut out debris avoiding bristles.

Troubleshooting image

Reassemble and test the machine.

Are the bristles now spinning?

Has this resolved the performance issue?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Clear the Cleaner head

Turn off and unplug the machine.

Remove the end caps

Undo coloured soleplate fasteners with a coin.

Rotate endcaps to remove.

Troubleshooting image

Remove the Brush bars

Pull out Brush bar sections.

Cut out debris avoiding bristles.

Troubleshooting image

Reassemble and test the machine.

Do the brushes now spin continually?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Test the hose suction

Lift up the Wand cap and pull the metal tube from inside the Wand until it locks into place.

Troubleshooting image

Press button to release Hose and Wand handle from the machine.

Troubleshooting image

Press side buttons to remove the Wand handle from the hose.

Troubleshooting image

Test the suction from the hose.

Troubleshooting image

Is the suction from the hose strong or weaker than usual?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Check the hose

To remove the hose, rotate the base of the hose downwards until it clicks, then twist away from the machine.

Troubleshooting image

Check the hose for blockages and remove as necessary.

Has checking the hose resolved the problem?

Check the valve pipe

Squeeze the release catches to remove the valve pipe and check inside.

Troubleshooting image

Has checking the valve pipe resolved the problem?

Check the bin and cyclone

Press the button at the top of the cyclone handle and remove the bin from the machine.

Troubleshooting image

Press the red button on the top of the cyclone to open the bin base.

Troubleshooting image

Press the button near the rectangular inlet to remove the clear bin from the cyclone.

Troubleshooting image

The clear bin can be wiped with a damp cloth.

WARNING: Do not use any detergent or polish on any part of the machine.

Check the bin and cyclone for blockages and remove as necessary.

Ensure that the bleed valve at the top of the cyclone is free of debris and moves freely when pressed.

Clear any hair or fibres from the cyclone shroud.

WARNING: Do not use any water on the cyclone.

Troubleshooting image

Once the parts are completely dry, reassemble and test the machine.

Has clearing the bin and cyclone resolved the problem?

Remove the Wand

To release the Wand, lift up Wand cap and pull metal Wand from inside handle until it clicks.

Troubleshooting image

To release the Wand, lift up Wand cap and pull metal Wand from inside handle until it clicks.

Troubleshooting image

Press side buttons to remove the Wand handle from the hose.

Troubleshooting image

Check the Wand

Look through both ends of the wand and remove any blockages.

Troubleshooting image

Check the Wand for damage.

Please follow the next step.

Check the hose

To remove the hose, rotate base of the hose downwards until it clicks, then twist away from the machine.

Troubleshooting image

Check the hose for blockages and remove as necessary.

Please follow the next step.

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

When did the machine last have power?

Thermal cut out

Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat. This usually happens because the filters need washing or your machine is blocked.

Carry out the performance checks, and if your machine cuts out unplug and leave for at least 2 hours to cool down.

Where did you notice the drop in performance?

Check electrical supply

Is the power cord or plug damaged?

Are the other household appliances working?

Does the vacuum work when plugged into another socket?

Has checking the electrics resolved the problem?

Clear the Cleaner head

Turn off and unplug the machine.

Remove the end caps

Undo coloured soleplate fasteners with a coin.

Rotate endcaps to remove.

Troubleshooting image

Remove the Brush bars

Pull out Brush bar sections.

Cut out debris avoiding bristles.

Troubleshooting image

Reassemble and test the machine.

Are the bristles now spinning?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Turn off the Brush bar

Press the foot pedal to release the Cleaner head and pull the handle towards you.

Troubleshooting image

Ensure the stabilising wheels are fully retracted and press the ON/OFF switch.

Troubleshooting image

Has the noise stopped?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Clear the Cleaner head

Turn off and unplug the machine.

Remove the end caps

Undo coloured soleplate fasteners with a coin.

Rotate end caps to remove.

Troubleshooting image

Remove the Brush bars

Pull out Brush bar sections.

Cut out debris avoiding bristles.

Troubleshooting image

Refit the Brush bars and tighten the fasteners.

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Remove the bin and cyclone

Press the button at the top of the cyclone handle.

Troubleshooting image

Remove the bin and cyclone from the machine.

Troubleshooting image

Turn the machine on, keeping it in the upright position.

Is the whistle still present with the cyclone removed?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Blockage checks

This is likely to be caused by a blockage.

Remove the Wand

Lift up the Wand cap and pull the metal tube from inside the Wand until it locks into place.

Troubleshooting image

Press button to release Hose and Wand handle from the machine.

Troubleshooting image

Press side buttons to remove the Wand handle from the hose.

Troubleshooting image

Check the Wand

Look through both ends of the wand and remove any blockages.

Troubleshooting image

Check the Wand for damage.

Has checking the Wand resolved the problem?

Check the hose

To remove the hose, rotate the base of the hose downwards until it clicks, then twist away from the machine.

Troubleshooting image

Check the hose for blockages and remove as necessary.

Refit the Wand and Hose.

Has checking the hose resolved the problem?

Clear the Cleaner head

Turn off and unplug the machine.

Remove the end caps

Undo coloured soleplate fasteners with a coin.

Rotate endcaps to remove.

Troubleshooting image

Remove the Brush bars

Pull out Brush bar sections.

Cut out debris avoiding bristles.

Troubleshooting image

Refit the Brush bars and tighten the fasteners.

Has checking the Cleaner head resolved the problem?

Clean the valve pipe and Cleaner head hose

Squeeze the release catches to remove the valve pipe and check inside.

Troubleshooting image

Pull the top end of the tube away from the machine and check inside.

Troubleshooting image

NB: Check all seals for damage.

Refit the Valve pipe and Cleaner head hose.

Has checking the valve pipe resolved the problem?

Wash the filter

Please follow the steps in the video to wash the filter.

For a step by step guide, please select step by step.

Has washing the filter resolved the problem?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Check the bin and cyclone

Press the button at the top of the cyclone handle and remove the bin from the machine.

Troubleshooting image

Press the red button on the top of the cyclone to open the bin base.

Troubleshooting image

Press the button near the rectangular inlet to remove the clear bin from the cyclone.

Troubleshooting image

The clear bin can be wiped with a damp cloth.

WARNING: Do not use any detergent or polish on any part of the machine.

Check the bin and cyclone for blockages and remove as necessary.

Ensure that the bleed valve at the top of the cyclone is free of debris and moves freely when pressed.

Clear any hair or fibres from the cyclone shroud.

WARNING: Do not use any water on the cyclone.

Troubleshooting image

Once the parts are completely dry, reassemble and test the machine.

Has cleaning the bin and cyclone resolved the problem?

Do not plug in or attempt to use the machine until it has been repaired by one of our engineers.

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Check the Brush bar

Press the foot pedal to release the Cleaner head and pull the handle towards you.

Troubleshooting image

Ensure the stabilising wheels are fully retracted or the Brush bar will not operate.

Troubleshooting image

Lay the machine on its side, keeping it in the vacuuming position.

Turn the machine on and check to see if the Brush bar is spinning.

Troubleshooting image

NB: Please keep hair and loose clothing away from the Brush bar.

Does the Brush bar spin when the machine is reclined?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Clear the Cleaner head

Turn off and unplug the machine.

Remove the end caps

Undo coloured soleplate fasteners with a coin.

Rotate endcaps to remove.

Troubleshooting image

Remove the Brush bars

Pull out Brush bar sections.

Cut out debris avoiding bristles.

Troubleshooting image

Reassemble and test the machine.

Are the bristles now spinning?

Has this resolved the problem?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Blockage

This is likely to be caused by a blockage.

Release the catch by hand

Pull the clear plastic catch on the base away from the bin. Open the bin base and tip away the contents.

Troubleshooting image

Press the bin release button on the cyclone handle.

Does the red and clear rod slide up and down freely?

Please call us to resolve this problem.

It looks like the Clear bin isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Clear bin

Part no. 908657-02

Replacement clear bin for your Dyson vacuum cleaner.

€39.36

Clear bin

Part no. 908657-02

Replacement clear bin for your Dyson vacuum cleaner.

€39.36

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Refit the stabiliser

Turn off and unplug the machine.

Lay the machine flat resting on the clear bin.

Troubleshooting image

Using both thumbs, guide the top of the stabiliser into position so that the lug on the right clicks into place behind the guide.

Has this resolved the problem?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Ensure the machine is being reclined correctly

Press the foot pedal to release the Cleaner head and pull the handle towards you.

Troubleshooting image

If the customer has stood directly on the Cleaner head, it will not lie flat on the floor surface. The stabiliser will also not retract and therefore the Brush bar will not operate.

Has this resolved the problem?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please start a WhatsApp conversation or contact our team on 01-475-7109. If you’re using the Dyson Zone™ headphones, please contact us through our helpline or directly on Live Chat to connect with an Expert. To start a Live Chat, just click the purple icon at the bottom of the page and choose ‘Product help and support’, then select ‘Headphones support’).

Assembly instructions

Slide the Wand down inside hose until it clicks.

Troubleshooting image

Attach the Wand handle and Wand.

Slot wand into top of the machine and click into place.

Troubleshooting image

Wind cable anti-clockwise and secure with clip.

Troubleshooting image

Click the tools into place.

Troubleshooting image

Is there anything else we can help with?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How to use the Brush bar

Note: the Brush bar will automatically switch on when the machine is reclined into the vacuuming position.

Troubleshooting image

Press the brush control button located next to the power switch to turn the Brush bar off for vacuuming delicate rugs, looped carpets and hard floors.

Troubleshooting image

Press the button again to restart the Brush bar for vacuuming carpets.

Is there anything else we can help with?

Carrying your Dyson machine

Lift the machine only by the carry handle on the cyclone top.

Troubleshooting image

For the safety, do not press the cyclone release when carrying your machine.

Is there anything else we can help with?

How to start vacuuming

To begin:

  • Plug the machine in
  • Press the pedal at the back of the machine with your foot and lower the machine into the vacuuming position
Troubleshooting image

Ensure that the stabilising wheels are fully retracted then press the On/Off switch.

Troubleshooting image

Small movements of the wrist will create a zigzag motion in the Cleaner head allowing easier cleaning around furniture.

Troubleshooting image

When finished, push the machine back into the upright position.

Troubleshooting image

NB: Ensure the stabilising wheels are fully locked in place before letting go of the cleaner.

Please follow the next step.

Wand mode

Lift up the Wand cap and pull the metal tube from inside the Wand until it locks into place.

Troubleshooting image

Press the button to release Hose and Wand handle from machine. To push the Wand back inside Hose, ensure Hose is straight. Press Wand release button and push Wand down into Hose.

Troubleshooting image

Hose mode

First extend the Wand, then press side buttons to remove Wand handle from hose.

Tools can be fitted directly to the end of hose or wand.

Troubleshooting image

Always work with the machine at the bottom of the stairs.

Troubleshooting image

Is there anything else we can help with?

Please open the PDF for the user guide.

Is there anything else we can help with?

Empty the bin

Press the button at the top of the handle and remove the bin from the machine.

Troubleshooting image

Press the button again to open the bin base and empty it of dust.

Troubleshooting image

This can be done directly into a bin, or into a bag wrapped around the cyclone.

Is there anything else we can help with?

Washing the filter

Please follow the steps in the video to wash the filter.

For a step by step guide, please select step by step.

Is there anything else we can help with?

Turn the power off and unplug the machine.

Lift the filter release catch and remove the filter from the machine.

Troubleshooting image

Wash the filter in cold water only.

WARNING: Please do not use detergent, do not wash in a dishwasher or washing machine.

Troubleshooting image

Leave filter to dry in a warm place until completely dry. Do not dry the filter in a tumble dryer, microwave, oven, or near an open flame.

Troubleshooting image

Make sure the filter is completely dry before replacing in the machine.

Replace the filter into the filter casing and then put back into the cyclone top.

This filter should be washed at least once every 3 months. The permanent filter located under the clear bin should last the lifetime of the machine and does not need to be washed.

Please do not remove this filter.

Is there anything else we can help with?