Cookie Settings
Dyson websites use cookies. By continuing to use our websites, you accept that cookies may be stored on your device, as outlined in our cookie policy.
Wipe the loop amplifier and base with a dry or damp cloth.
WARNING: Do not use detergents or polish.
We're glad the problem's been solved.
Please let us know if there's anything else we can help you with.
Switch the machine on.
When in the ‘on’ position the ON/OFF button should have a blue LED light surround.
Turn the airflow control knob to full lock in a clockwise and then anti-clockwise direction, whilst testing the airflow.
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our team via live chat.
We're glad the problem's been solved.
Please let us know if there's anything else we can help you with.
We need a little more information to help us solve your issue.
Please contact our customer service team via live chat.
Check that the household electrics are on.
Check the plug and power cord for signs of damage.
Try the machine in a different plug socket.
Remove the loop amplifier by holding the base firmly and turning anti-clockwise to unlock.
Test the machine with the loop amplifier removed. If the noise still occurs, this suggests it is an issue with the motor.
Refit the loop amplifier turning clockwise, ensuring that there are no gaps.
AM01 is intended for use as a desktop fan.
The fan has a strong, smooth airflow when switched on. The airflow should be strong enough to lift a sheet of newspaper past 45 degrees.
Hold a newspaper approximately 2 meters (6' 6'') away from the product with the airflow control dial turned to maximum.
Ensure all the feet are attached to the base of the machine.
Place the fan on a flat, non-slip surface.
Before switching on, please make sure the fan is positioned so that the airflow or oscillation is not obstructed.
Press the Oscillation button to start and stop the fan turning.
Please ensure the correct button is being pressed.
On/Off
Oscillation
Airflow
In most cases, smell can be caused by a build up of dust around the loop.
Wipe the machine with a soft dry cloth prior to use and this may eliminate the smell.
This issue can occur if the machine is running and the power is cut e.g. plug pulled out, power cut etc.
Unplug the machine for at least 5 seconds or until the LED goes out.
Plug the machine back in and retest.
This issue can occur if the machine is running and the power is cut e.g. plug pulled out, power cut etc.
Unplug the machine for at least 5 seconds or until the LED goes out.
Plug the machine back in and retest.
Unplug the machine for at least 5 seconds or until the LED goes out.
Plug the machine back in and retest.
If this is the first use, please remove the clear film.
Remove the loop amplifier by holding the base firmly and turning anti-clockwise to unlock.
Refit the loop amplifier turning clockwise, ensuring that there are no gaps.
Ensure that the machine is on a flat stable surface.
Push the base firmly and check for any damage or obstructions to the runners on the Main body assembly.
Retest the machine.
Ensure that the machine is on a flat stable surface.
Push the base firmly and check for any damage or obstructions to the runners on the Main body assembly.
Retest the machine.
Remove clear film surrounding the Main body before use.
Lower the loop amplifier onto the base, aligning the arrows. Once aligned, turn the loop amplifier clockwise to lock.
The serial number can be found on the base of the machine.
Remove clear film surrounding the Main body before use.
Plug the Dyson in and switch ON at the wall. Note: Before switching on, please make sure the heater is positioned so that the airflow or oscillation is not obstructed. Ensure that the machine is placed on a stable solid surface.
Turn the machine on using the ON/OFF button on the machine.
Turn the airflow control dial clockwise to full lock, to give maximum airflow.
Press the Oscillation button to start and stop the fan turning.
AM01 Desk 12 Inch™