Skip navigation
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Dyson Small Ball Animal+™

Let's get your machine working.

See all steps

Please select the appropriate option

Empty the bin

To ensure your machine continues to clean effectively, the clear bin must be emptied as soon as the dust reaches the MAX mark.

To empty the clear bin press the catch on top of the carry handle again to release dust directly into a dustbin.

Remove the clear bin by pressing the catch on top of the carry handle.

Shake or tap firmly to remove all dust from inside the fine dust collector.

Press firmly on the centre of the clear bin base to close.

Is there anything else we can help with?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please select the appropriate option

Does the noise occur when the machine is standing upright?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the cleaner head

With the machine unplugged, remove the Cleaner head.

Lay the machine on its back.

Locate the red clip underneath the Cleaner head.

Slide the clip towards the ball and firmly pull the Cleaner head off.

Clear the Brush bar

Open the soleplate by undoing the two red release catches.

Using scissors, carefully cut away any hairs and fibres from the Brush bar.

Check the cleanerhead inlet for blockages and remove as necessary.

Check the cleanerhead opening on the machine for blockages and remove as necessary.

Check the internal hose

Undo the purple filter cap in the centre of the ball shell.

Remove the ball shell to gain better access to the internal hose.

Pull the red internal hose collar down, unclip it and then check for blockages.

Reassemble and test machine.

Has clearing the Cleaner head resolved the problem?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Whistling noise

This suggests that air is leaking, probably due to a blockage or clogged filters.

Please select the appropriate option

Check the bin and cyclone

Empty the bin.

Press the bin release button and lift the bin off the machine.

Clean the cyclone shroud.

With the base open, press the grey button on the side of the cyclone to remove the clear plastic bin from the cyclone.

Remove any fibres or debris from the shroud using a soft brush or lint-free cloth.

Clean the cyclone shroud

With the base open, press the grey button on the side of the cyclone to remove the clear plastic bin from the opaque cyclone.

Remove any fibres or debris from the shroud usibng a soft brush or lint-free cloth.

Check the inlet on the cyclone for blockages and remove as necessary.

Check the duct on the machine that connected to the cyclone for blockages and remove as necessary.

Re-assemble and test the machine.

Has clearing the bin, cyclone and duct resolved the problem?

Test the machine to check Brush bar is spinning

Plug the machine in and recline into the vacuuming position.

Turn the machine on and watch the Brush bar through the Cleaner head window.

Does the Brush bar spin when the machine is reclined?

Check the cleaner head

With the machine unplugged, remove the cleanerhead.

Lay the machine on it's back.

Locate the red clip underneath the cleanerhead.

Check cleanerhead inlet and the corresponding opening on the machine for blockages and remove as necessary.

Slide the clip towards the ball and firmly pull the cleanerhead off.

Remove the filter cap

Undo the purple filter cap in the centre of the ball shell.

Remove the ball shell to gain better access to the internal hose.

Check the internal hose

Pull the red collar away from the machine and check the hose for blockages.

Check Cleaner head inlet and the corresponding opening on the machine for blockages and remove as necessary.

Check the Cleaner head opening on the machine for blockages and remove as necessary.

Re-assemble and test the machine.

Check cleanerhead

If the problem is not resolved, carry out the following checks:

Open the soleplate by undoing the two red release catches.

Pull the Cleaner head brush housing away from the soleplate.

Clear the brushbar

Using scissors, carefully cut away any hairs and fibred from the Brush bar.

Locate the Brush bar end cap screw on the brush housing and undo using a Phillips screwdriver.

Re-assemble and test the machine.

Has clearing the cleaner head resolved the problem?

Check the wand suction

Turn the machine on and with the machine upright, test the suction from the end of the wand.

Is there suction from the wand?

Turn the machine on

Recline the machine back into the vacuuming position and turn the machine on.

Is there suction from the Wand when reclined?

Check the changeover valve

Remove the bin and cyclone from the machine.

Remove the Wand from the machine.

Remove the hose from the machine.

Check the changeover valve for blockages and remove as necessary.

Re-assemble and test the machine.

Has checking the changeover valve resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the Wand

Remove the Wand from the machine.

Lift the Wand handle up until it clicks.

Press the red Wand release catch at the top of the main duct (just above the ON/OFF power button) to detach the Wand.

Remove the bin

Remove the bin and cyclone from the machine.

Remove the hose

Locate the red hose catch at the base of where the bin was fitted.

Press the catch in the direction of the hose and firmly pull the hose out of the back of the machine.

Check for blockages

Check both parts for blockages and remove as necessary.

Re-assemble and test the machine.

Has clearing the hose and Wand resolved the problem?

Check the changeover valve

Remove the bin and cyclone from the machine.

Remove the Wand and hose from the machine.

Check the change over valve for blockages and remove as necessary.

Re-assemble and test the machine.

Has clearing the changeover valve resolved the problem?

Watch the filters video

Please follow the steps in the video.

The model shown may vary from the product selected but the process remains the same.

Has washing the filters resolved the problem?

Remove bin

To wash the pre-filters:

Remove the cyclone top and bin assembly from the machine.

Remove pre-filter

Lift the pre-filter housing catch.

Remove filter from the cyclone top.

Wash pre-filter

Run cold water through open end of filter for approximately 10 seconds.

Turn upside down and tap 10 times.

Squeeze and twist filter.

Repeat until clean.

Dry pre-filter

Allow 24 hours to dry (place filter on its side for quickest dry time).

Ensure filter is completely dry before refitting into machine.

Remove the post-filter

Lay the machine back and unscrew the blue ball shell assembly locking mechanism by turning anti-clockwise (Approximately 10 times) until it can be lifted off machine.

Twist post filter anti-clockwises and lift out from the machine.

Press down on each of the three catches to separate the post filter assembly into two parts.

Wash the filter

Rinse the filter element under cold tap for approximately 10 seocnds.

Tap the outer edge against hard surface 10 times.

Repeat until clean.

Dry post-filter

Allow 24 hours to dry.

Ensure filter is completely dry before refitting onto machine.

Re-assemble post-filter

To reassemble the post-filter, align the arrow on the tab on each part and firmly press both parts together until the catches click closed.

Place post filter assembly back onto machine and twist clockwise until it locks in place.

Replace ball shell assembly and turn the blue locking mechanism clockwise (approximately 10 times) until a ratchet noise is heard.

Has washing the filters resolved the problem?

Please call us to resolve this problem.

It looks like the Hose isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

Hose

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Hose isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

Hose

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Hose isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

Hose

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the cleaner head

With the machine unplugged, remove the cleanerhead.

Lay the machine on it's back.

Locate the red clip underneath the cleanerhead.

Slide the clip towards the ball and firmly pull the cleanerhead off.

Check the internal hose

Undo the purple filter cap in the centre of the ball shell, and remove the ball shell to gain better access to the internal hose.

Pull the red collar away from the machine and check the hose for blockages.

Check the cleanerhead inlet and remove as necessary.

Check the Cleaner head opening on the machine for blockages and remove as necessary.

Re-assemble and test the machine.

Does the Brush bar spin after clearing the head?

Wash the filters

Please follow the steps in the video.

Is there anything else we can help you with?

Remove the bin

To wash the pre-filters:

Remove the cyclone top and bin assembly from the machine.

Remove the pre-filter

Lift the pre-filter housing catch.

Remove filter from the cyclone top.

Wash the pre-filter

Run cold water through open end of filter for approximately 10 seconds.

Turn upside down and tap 10 times.

Squeeze and twist filter.

Repeat until clean.

Dry pre-filter

Allow 24 hours to dry (place filter on its side for quickest dry time).

Ensure filter is completely dry before refitting into machine.

Remove the post-filter

Lie the machine back and unscrew the blue ball shell assembly locking mechanism by turning anti-clockwise (Approximately 10 times) until it can be lifted off machine.

Twist post-filter anti-clockwise and lift out from the machine.

Press down on each of the three catches to separate the post-filter into two parts.

Wash the post-filter

Rinse the filter element under cold tap for approximately 10 seconds.

Tap the outer edge against hard surface 10 times.

Repeat until clean.

Dry post-filter

Allow 24 hours to dry.

Ensure filter is completely dry before refitting onto machine.

Reassemble the post-filter

To reassemble the post-filter, align the arrow on the tab on each part and firmly press both parts together until the catches click closed.

Place post-filter back onto machine and twist clockwise until it locks in place.

Replace ball shell assembly and turn the blue locking mechanism clockwise (approximately 10 times) until a ratchet noise is heard.

Is there anything else we can help you with?

Check the red rod

When pressing down the red button to open the bin base, the red upper release rod may get stuck on the cyclone, preventing the base from opening.

Slide the red upper release rod on the back of the cyclone up towards the top of the cyclone pack and try the release button again.

Has freeing the rod resolved the problem?

Manually release the base

By sliding down the lower section of the red release rod, try to manually open the bin base.

Can the base be opened manually?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Remove the post-filter

Lie machine back and unscrew the blue ball shell assembly locking mechanism by turning anti-clockwise (approximately 10 times) until it can be lifted off machine.

Twist post-filter anti-clockwise and lift out from the machine.

Check the housing for any debris and remove as necessary.

It is recommended that the filters on this machine are washed at least once a month.

Replace the filter and reassemble the machine.

Has this resolved the problem?

Clear the bin and cyclone

Empty the bin.

Press the bin release button and lift the bin off the machine.

Empty the bin

Empty the bin by pressing the release button again to open the bin base.

Remove clear plastic bin

With the base open, press the grey button on the side of the cyclone to remove the clear plastic bin from the cyclone.

Clean the cyclone shroud

Remove any fibres or debris from the Shroud using a soft brush or lint-free cloth.

Check the top and bottom inlet on the cyclone for blockages and remove as necessary.

Check duct

Check the duct on the machine that connected to the cyclone for blockages and remove as necessary.

Re-assemble and test the machine.

Has clearing the bin, cyclone and duct resolved the problem?

Check machine is reclined

The Brush bar will spin when the machine is reclined and stop when it is returned to the upright position or the grey Brush bar button is pressed.

Check the cleaner head

With the machine unplugged, remove the Cleaner head.

Lay the machine on its back.

Locate the red clip underneath the Cleaner head.

Slide the clip towards the ball and firmly pull the cleanerhead off.

Check the inlet hose

Undo the purple filter cap in the centre of the ball shell.

Check through for any blockages and remove as necessary.

If this is difficult, remove the post-filter side to allow more room to grip the internal hose cuff.

Check the Cleaner head inlet and the corresponding opening on the machine for blockages and remove as necessary.

Remove the Ball shell to gain better access to the internal hose.

Pull the red collar away from the machine and check the hose for blockages.

Re-assemble and test the machine.

Please follow the next step.

Check the cleaner head

Open the soleplate by undoing the two red release catches.

Pull away the soleplate from the motor housing.

Undo the Phillips screw.

Rotate the end cap and remove the Brush bar.

Check the Cleaner head for any blockages and remove as necessary.

Using scissors, carefully cut away any hairs and fibres from the Brush bar.

Reassemble and test the machine.

Does the Brush bar spin after clearing the Cleaner head?

Please note: In normal use, the Brush bar automatically turns OFF when the machine is upright and automatically turns ON when the machine is in the vacuuming position.

Reset brush bar

To reset the Brush bar press the Brush bar control button twice or switch the machine OFF and back ON.

Please note: In normal use, the Brush bar automatically turns OFF when the machine is upright and automatically turns ON when the machine is in the vacuuming position.

Has resetting the Brush bar resolved the problem?

Check floor type

Test the Brush bar control on a different floor type in the property.

Has checking the floor type resolved the problem?

Please call us to resolve this problem.

It looks like the Cleaner head isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Cleaner head

Part no. 966441-02

Replacement cleaner head for your Dyson vacuum cleaner.

€79.99

Cleaner head

Cleaner head

Part no. 966441-02

Replacement cleaner head for your Dyson vacuum cleaner.

€79.99

How to install this part

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check switch

Press the rear of the switch to make sure it stays in the on position.

Please note: The switch does not light up.

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

When did the machine last have power?

Thermal cut out

Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat. This usually happens because the filters need washing or your machine is blocked.

Carry out the performance checks, and if your machine cuts out unplug and leave for at least 2 hours to cool down.

Please select the appropriate option

Wash the filters

Please follow the steps in the video.

Has washing the filters resolved the issue?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Remove bin

To wash the pre-filters:

Remove the cyclone top and bin assembly from the machine.

Remove pre-filter

Lift the pre-filter housing catch.

Remove filter from the cyclone top.

Wash pre-filter

Run cold water through open end of filter for approximately 10 seconds.

Turn upside down and tap 10 times.

Squeeze and twist filter.

Repeat until clean.

Dry pre-filter

Allow 24 hours to dry (place filter on its side for quickest dry time).

Ensure filter is completely dry before refitting into machine.

Remove post-filter

Lie the machine back and unscrew the blue ball shell assembly locking mechanism by turning anti-clockwise (Apporximately 10 times) until it can be lifted off machine.

Twist post filter anti-clockwises and lift out from the machine.

Press down on each of the three catches to separate the post filter assembly into two parts.

Wash post-filter

Rinse the filter element under cold tap for approximately 10 seocnds.

Tap the outer edge against hard surface 10 times.

Repeat until clean.

Dry post-filter

Allow 24 hours to dry.

Ensure filter is completely dry before refitting onto machine.

Re-assemble post-filter

To re-assemble the post filter assembly, align the arrow on the tab on each part and firmly press both parts together until the catches click closed.

Place post filter assembly back onto machine and twist clockwise until it locks in place.

Replace ball shell assembly and turn the blue locking mechanism clockwise (approximately 10 times) until a ratchet noise is heard.

Has washing the filters resolved the issue?

Check electrical supply

Is the power cord or plug damaged?

Are the other household appliances working?

Does the vacuum work when plugged into another socket?

Has checking the electrics resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Mothball smell

New machines may initially have a mothball-like smell due to the varnish used on their motors.

The smell will dissipate after a few weeks.

Is there anything else we can help you with?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please select the appropriate option

Loosen base

This should improve over time.

If you shake the bin slightly the bin base should continue to fully open.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Retest the release

Replace the bin onto the machine.

Retry the bin release catch.

Has retrying the bin release resolved the problem?

Manual release

By sliding down the lower section of the red release rod, try to manually open the bin base.

Can the base be opened manually?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the cleaner head

With the machine unplugged, remove the cleanerhead.

Lay the machine on its back.

Locate the red clip underneath the cleanerhead.

Slide the clip towards the ball and firmly pull the cleanerhead off.

Clear the brushbar

Open the soleplate by undowing the two red release catches.

Using scissors, carefuly cut away any hairs and fibres from the brushbar.

Check the cleanerhead inlet for blockages and remove as necessary.

Check the Cleaner head opening on the machine for blockages and remove as necessary.

Check the internal hose

Undo the purple filter cap in the centre of the ball shell.

Remove the ball shell to gain better access to the internal hose.

Pull the red collar away from the machine and check the hose for blockages.

Re-assemble and test the machine.

Has clearing the head and internal hose resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the brushbar

Plug in and switch on the machine.

Recline it into the vacuuming position.

Check the Brush bar through the window at the front of the Cleaner head.

Does the brushbar spin when the machine is reclined?

Check soleplate

Check the soleplate to ensure there is no debris or damage to the wheels, and check the wheels are not missing.

Is there any damage to the soleplate?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Adjust slider

Adjust the slider on the Cleaner head from MAX to min and retest the machine.

Has checking the seals resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the cleaner head

With the machine unplugged, remove the Cleaner head.

Lay the machine on its back.

Locate the red clip underneath the Cleaner head.

Pull the cleanerhead brush housing away from the soleplate.

Slide the clip towards the ball and firmly pull the cleanerhead off.

Open the soleplate by undoing the two red release catches.

Clear the brushbar

Using scissors, carefuly cut away any hairs and fibres from the brushbar.

Locate the brushbar end cap screw on the brush housing and undo using a phillips screwdriver.

Check the cleanerhead inlet and the corresponding opening on the machine for blockages and remove as necessary.

Re-assemble and test the machine.

Has checking the Cleaner head resolved the problem?

Reset brush bar

To reset the Brush bar press the Brush bar control button twice or switch the machine OFF and back ON.

Please note: In normal use, the Brush bar automatically turns OFF when the machine is upright and automatically turns ON when the machine is in the vacuuming position.

Has resetting the brushbar resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Cleaner head isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Cleaner head

Part no. 966441-02

Replacement cleaner head for your Dyson vacuum cleaner.

€79.99

Cleaner head

Cleaner head

Part no. 966441-02

Replacement cleaner head for your Dyson vacuum cleaner.

€79.99

How to install this part

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Which part of the hose has split?

Please call us to resolve this problem.

It looks like the Hose isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

Hose

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Hose isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

Hose

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Hose isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

Hose

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Which part is broken?

Please call us to resolve this problem.

It looks like the Clear bin isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Clear bin

Part no. 965070-01

Replacement clear bin for your Dyson vacuum cleaner.

€14.99

Clear bin

Clear bin

Part no. 965070-01

Replacement clear bin for your Dyson vacuum cleaner.

€14.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Cleaner head isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Cleaner head

Part no. 966441-02

Replacement cleaner head for your Dyson vacuum cleaner.

€79.99

Cleaner head

Cleaner head

Part no. 966441-02

Replacement cleaner head for your Dyson vacuum cleaner.

€79.99

How to install this part

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Combination tool isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Combination tool

Part no. 965072-01

Two tools in one, for versatile cleaning around the home.

€14.99

Combination tool

Part no. 965072-01

Two tools in one, for versatile cleaning around the home.

€14.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Cyclone isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Cyclone

Part no. 966442-04

Replacement cyclone for your Dyson vacuum cleaner.

€54.99

Cyclone

Cyclone

Part no. 966442-04

Replacement cyclone for your Dyson vacuum cleaner.

€54.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Cyclone handle isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Cyclone handle

Part no. 965074-03

Replacement cyclone handle for your Dyson vacuum cleaner.

€4.99

Cyclone handle

Cyclone handle

Part no. 965074-03

Replacement cyclone handle for your Dyson vacuum cleaner.

€4.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Wand handle isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Wand handle

Part no. 967277-01

Replacement wand handle for your Dyson vacuum cleaner.

€29.99

Wand handle

Wand handle

Part no. 967277-01

Replacement wand handle for your Dyson vacuum cleaner.

€29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Hose isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

Hose

Hose

Part no. 967274-02

Replacement hose for your Dyson vacuum cleaner.

€29.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Post filter isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Post filter

Part no. 967276-01

Replacement post filter for your Dyson vacuum cleaner.

€39.99

Post filter

Post filter

Part no. 967276-01

Replacement post filter for your Dyson vacuum cleaner.

€39.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Pre-filter isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Pre-filter

Part no. 966444-02

Replacement pre-motor filter for your Dyson vacuum cleaner.

€19.99

Pre-filter

Pre-filter

Part no. 966444-02

Replacement pre-motor filter for your Dyson vacuum cleaner.

€19.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Stair tool isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Stair tool

Part no. 965082-01

For vacuuming narrow or difficult-to-reach carpeted areas, such as stairs and corners.

€14.99

Stair tool

Part no. 965082-01

For vacuuming narrow or difficult-to-reach carpeted areas, such as stairs and corners.

€14.99

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

What problem are you having with the reclining mechanism?

Check the ducts

With the machine unplugged, remove the Wand from the back of the machine (this is for a later check).

Lay the machine on the floor, bin side down and remove the Cleaner head by pressing the red release catch.

Check the lower duct (where the Cleaner head fits on the machine) for blockages and remove as necessary.

Turn the machine over and unclip the internal hose from between the two halves of the ball.

Check the internal hose for blockages and remove as necessary (it should be possible to see through to the lower duct).

Please select the next step

Check the changeover valve

Remove the Cleaner head from the machine and check the openings for blockages and remove as necessary.

Check the opening where the hose was fitted for blockages (in particular any pens or pencils etc.) and remove as necessary.

Re-assemble and test the machine.

Has checking the ducts resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the ducts

With the machine unplugged, remove the wand from the back of the machine (this is for a later check).

Lay the machine on the floor, bin side down and remove the cleaner head by pressing the red release catch.

Check the lower duct (where the Cleaner head fits on the machine) for blockages and remove as necessary.

Turn the machine over and unclip the internal hose from between the two halves of the ball.

Check the internal hose for blockages and remove as necessary (it should be possible to see through to the lower duct).

Please select the next step

Check the changeover valve

Remove the main hose from the machine by pressing the red release catch (the catch is not part of the hose and remains on the machine).

Check the duct where the hose was fitted for blockages (in particular any pens or pencils etc.) and remove as necessary.

Reassemble and test the machine.

The vacuum needs to be pushed slightly beyond vertical for the stabilisers to click into the correct position.

Has checking the ducts resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please call us to resolve this problem.

It looks like the Cleaner head isn't working. We know how to fix it – we just can’t do it online.

One of our Dyson experts can help you get the parts or assistance you need.

Cleaner head

Part no. 966441-02

Replacement cleaner head for your Dyson vacuum cleaner.

€79.99

Cleaner head

Cleaner head

Part no. 966441-02

Replacement cleaner head for your Dyson vacuum cleaner.

€79.99

How to install this part

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check for blockages

This suggests that there is a blockage in the machine.

Please select the appropriate option

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 01-475-7109

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check machine is reclined

The brushbar will spin when the machine is reclined and stop when it is returned to the upright position or the grey brushbar button is pressed.

Check the cleaner head

With the machine unplugged, remove the cleanerhead.

Lay the machine on it's back.

Locate the red clip underneath the cleanerhead.

Slide the clip towards the ball and firmly pull the Cleaner head off.

Pull the red cuff to release.

Check the inlet hose

Check through for any blockages and remove as necessary.

If this is difficult, remove the post-filter side to allow more room to grip the internal hose cuff.

Check the cleanerhead inlet and the corresponding opening on the machine for blockages and remove as necessary.

Re-assemble and test the machine.

Please select the next step

How to attach the wand and hose

To attach the Wand, pull the handle up until it clicks and press the red Wand release catch to remove from the main duct.

Pull the Wand out of the hose. The Wand and hose are not attached whilst stowed.

The Wand must be turned upside down to lock into the hose and Wand cap opened out. There will be an audible click once they are securely attached.

To stow the Wand, slide the Wand through the hose and push onto the top of the main duct.

The release catch will click once in place.

Is there anything else we can help you with?

Quick start guide

Is there anything else we can help you with?

How to start vacuuming

Pull the handle up until it clicks into place.

With the machine plugged in, press the On/Off switch at the front of the handle to start the motor.

The stabilisers will move to the correct position automatically as the machine is reclined.

Press the red handle release button between the ON/OFF and Brush bar buttons to lower the handle.

Use the Brush bar

The Brush bar will begin to turn automatically when the machine is reclined.

Press the grey button beside the ON/OFF switch to turn the brushes off.

Keep the Brush bar on for cleaning carpets.

Turn the Brush bar off for use on tassled rugs or delicate surfaces.

Is there anything else we can help you with?

How to use the brushbar

The brushbar will begin to turn automatically when the machine is reclined.

Press the grey button beside the On/Off switch to turn the brushes off.

  • Keep the brushbar on for cleaning carpets.
  • Turn the brushbar off for use on tassled rugs or delicate surfaces.

Is there anything else we can help you with?

Carry the machine

Wrap the cable around the cable hooks at the top and bottom of the machine's spine.

Carry the machine by the handle at the top of the cyclone - not the handle that contains the Wand.

Is there anything else we can help you with?

Is there anything else we can help you with?

Assemble the machine

Attach the Cleaner head

  • Lay the machine on its back and fit the Cleaner head onto the connections.
  • Push firmly until the Cleaner head clicks into place and the red latch engages.

Attach the Wand to the machine

With the machine upright, slide the Wand in to the hose. (Please note there is not a catch for the Wand to click on to the hose, it just slides in to place).

Place the Wand and handle into the grooves on the top of the duct.

Press the red handle release button and push the Wand and handle down fully until it clicks.

Fit the tool holder

With the bin and cyclone removed, slide the tool holder onto the back of the machine, just above the ball.

Press the tool holder on with your thumbs, while holding the front of the machine with your fingers. The fitting is tight, so use a constant, firm pressure.

Refit the cyclone and clear bin unit and attach the tools.

NB: The tool holder is not designed to be removed once fitted.

Is there anything else we can help you with?

Clean the bin and cyclone

Remove the clear bin.

Press the catch on top of the carry handle.

Empty the bin

Press the catch on top of the carry handle again to release dust directly into a dustbin.

Separate the bin and cyclone

With the bin base open, press the grey button on the side of the cyclone (near the red rod).

Pull the clear bin away from the cyclone.

Wash the bin

Wash the bin with a damp cloth.

WARNING: Do not use any detergents, deodorants or other chemicals on any part of the machine.

Clean the shroud

Wipe the shroud with a soft dusting brush or dry lint free cloth.

WARNING: Do not use any liquids on the cyclone.

Ensure the bin is completely dry before reassembling the machine.

Is there anything else we can help you with?

The model shown may vary from the product selected but the process remains the same.

Wash the filters - video

Please follow the steps in the video.

Is there anything else we can help you with?

Remove bin

To wash the pre-filters:

Remove the cyclone top and bin assembly from the machine.

Remove pre-filter

Lift the pre-filter housing catch.

Remove filter from the cyclone top.

Wash pre-filter

Run cold water through open end of filter for approximately 10 seconds.

Turn upside down and tap 10 times.

Squeeze and twist filter.

Repeat until clean.

Dry pre-filter

Allow 24 hours to dry (place filter on its side for quickest dry time).

Ensure filter is completely dry before refitting into machine.

Remove post-filter

Lay the machine back and unscrew the blue ball shell assembly locking mechanism by turning anti-clockwise (Approximately 10 times) until it can be lifted off machine.

Twist post filter anti-clockwises and lift out from the machine.

Press down on each of the three catches to separate the post filter assembly into two parts.

Wash post-filter

Rinse the filter element under cold tap for approximately 10 seocnds.

Tap the outer edge against hard surface 10 times.

Repeat until clean.

Dry post-filter

Allow 24 hours to dry.

Ensure filter is completely dry before refitting onto machine.

Re-assemble post-filter

To re-assemble the post filter assembly, align the arrow on the tab on each part and firmly press both parts together until the catches click closed.

Place post filter assembly back onto machine and twist clockwise until it locks in place.

Replace ball shell assembly and turn the blue locking mechanism clockwise (approximately 10 times) until a ratchet noise is heard.

Is there anything else we can help you with?